|
Equipped with the latest in automation studio software, RUSCO Hydraulics can design and install custom portable hydraulic power units to take your hydraulic system from concept to reality. Based on a simple drawing, sketch or even a description of your idea, our service department can design and manufacture a turnkey hydraulic system that meets your exact needs, leaving our field service department to do the installation and start up.
Using the best components available and the highest standards of quality control, our custom-designed hydraulic power units are capable of delivering operating pressures of up to 5,000 psi and flow rates of up to 90 gpm. Whatever your application, RUSCO Hydraulics can provide the power to drive it. Custom power units by RUSCO Hydraulics have recently been installed in:
 |
Machine shops |
|
|
| |
Food processing plants |
|
|
| |
Steel and aluminum mills |
|
|
| |
Foundries |
|
|
| |
Mines and quarries |
|
|
| |
Injection molding plants |
|
|
 |
High-pressure
test stand for machine shop to test rebuilt
cylinders. (5000 psi, 5 gpm) |
|
|
Dual
pump power unit with back up/standby pumps
for waste treatment operations. (2000 psi,
9 gpm)
|
 |
|
 |
Brake
power unit with 250VDC supply and fail safe
accumulator backup for steel mill applications.
(2500 psi, 2 gpm) |
|
|
Custom
power unit for foundry applications. (3000
psi, 18 gpm)
|
 |
|
 |
Custom
power unit for mining/quarry application.
(2500 psi, 30 gpm) |
|
|
Tandem
pump/power unit for food processing industries.
(Each motor; 2000 psi, 3 gpm)
|
 |
|
 |
Custom
power unit for fabrication shop to test assembly.
(1500 psi, 7.5 gpm) |
|
|
Custom
power unit for aluminum rolling mill. (3000
psi, 90 gpm each)
|
 |
|
 |
Custom
power unit for quarry application. (2500 psi,
30 gpm) |
|
|
Tandem
pump power unit for food processing plants.
|
 |
|
 |
Triplex
power unit for a production line in a food
processing plant. (1500 psi, 40 gpm each)
|
|
|
Custom
power unit for a wire forming application.
(2000 psi, 35 gpm)
|
 |
|
 |
High
volume surge power unit for plastic injection
molding industries. (3500 psi, 60 gpm, 20
Gallon accumulators) |
|
|
